Uncategorized

      1.Current Market Conditions       At present, iron, aluminum and stainless steel are widely used in tableware and cooking utensils at home and abroad, which are more or less harmful to human health:       ①Iron pot: the iron in the dish is trivalent iron, which can not be absorbed […]

      Metal materials used in construction, especially roofing, were copper first, followed by surface treated steel, aluminum, stainless steel and titanium. With the continuous development of national economy and the continuous improvement of people’s living standards, people’s requirements on urban buildings, especially the aesthetic requirements of buildings are getting higher and higher.  

      Metal materials used in construction, especially roofing, were copper first, followed by surface treated steel, aluminum, stainless steel and titanium. With the continuous development of national economy and the continuous improvement of people’s living standards, people’s requirements on urban buildings, especially the aesthetic requirements of buildings are getting higher and higher.  

      Titanium element is widely distributed because its content is more than 0.4% of the mass of the earth’s crust, the world’s proven reserves of about 3.4 billion tons, in all elements in the content of the 10th (oxygen, silicon, aluminum, iron, calcium, sodium, potassium, magnesium, hydrogen, titanium).       American scientists

      1. Pressure plate welded titanium pipe: compared with multi-seam type, the titanium pipe has fewer welds. But the pressure plate process is more complicated, which requires a lot of molds, consumes more materials and processes. The weld will also affect the corrosion resistance and the appearance is not ideal.       2. Multi-weld

      ZTC4 alloy is a kind of α-β cast titanium alloy with moderate strength. It has good casting performance, welding performance and corrosion resistance. It is the most widely used cast titanium alloy at home and abroad. The alloy can be used under annealing or hot isostatic pressing, and can work under 350℃

      There are many kinds of automobile fasteners, including bolts, studs, screws, washers, retaining rings, pins, rivets, welding nails and combination parts and connectors. According to the survey, the demand for automotive fasteners accounts for about 23% of the total sales of the whole fastener industry, accounting for the highest proportion of the

      Titanium alloy screw is popular because it is a kind of active element, which can form a layer of TiO2 oxide film on the surface of the material at the moment of exposure to air. This layer of oxide film is very inert, which can prevent further oxidation and corrosion limited and

      Because titanium (refers to titanium and titanium alloy) has good mechanical and physical properties, its density is small and high strength, tensile strength σb and density ρ ratio σ B/P equal to 200, is almost the highest in all metal materials.       At the same time, it has very excellent

      Titanium alloy elbow fittings have been widely used in the petrochemical industry due to their excellent properties such as high strength, corrosion resistance, and excellent high-temperature performance. This article will discuss the applications of titanium alloy elbow fittings in the petrochemical industry.       Firstly, in the field of petroleum refining,